TAPSTRIKE BIO INSTRUCTIONS
TapStrike Bio.
Spray, wait, wipe.
Light spots: spray, wait 30-60 seconds, wipe with a damp cloth. Harder stains and soap scum: spray, scrub with a sponge or brush, then rinse with clean water.
CHOOSE YOUR APPLIANCE
Pick the appliance. Get the exact steps.
Select your appliance below — primary uses are on the box, secondary uses are also covered.
ON THE BOX — PRIMARY
ON THE BOX — ALSO WORKS FOR
PRIMARY USE — ON THE BOX
Taps & Faucets
2-4 SPRAYS PER TAP
Clears daily water spots, white marks at the tap base and cloudy chrome.
- 1Spray directly on the tap body, spout, handle and the ring at the tap base.
- 2Wait 30-60 seconds. Do not let it dry on the surface.
- 3Wipe with a damp cloth or sponge.
- 4Tougher spots: spray again and scrub gently with a soft brush.
- 5Rinse with water if needed and dry the chrome for a streak-free finish.
FREQUENCY
Weekly in hard-water homes. Twice a week if your water TDS is above 600.
NOTE
Brass: still acidic, so wipe off within a few minutes. Do not use on hot taps or wooden handles.
Related guides
Connect the TapStrike Bio routine to the stain you are fighting.
These links help you identify the residue, set a cleaning schedule from your water TDS, and switch to the heavy-duty route when build-up is thick.
PRODUCT
TapStrike Bio product page
Pack details, plant-derived ingredients and safe surfaces.
HEAVY BUILD-UP
TapStrike Intense instructions
Thick, years-old crust or rust marks need the heavy-duty spray first.
BLOG GUIDE
Remove stains from chrome taps
Why chrome clouds over and how to clear it without scratching the plating.
DIAGNOSE
Limescale vs soap scum vs rust
Identify the residue before you pick the cleaner.
TDS GUIDE
TDS 400, 600, and 800 ppm
Use your water reading to set how often taps and basins need a pass.
NEED A DIFFERENT ROUTE?
Thick, years-old scale?
TapStrike Bio is for daily care and light to medium scale. For thick, old crust or rust marks, start with TapStrike Intense, then switch to Bio for upkeep. For scale inside showerheads, geysers and washing machines, use WashDX.
GOOD TO KNOW
Not for marble, granite or natural stone. Acid etches them.
Avoid anodized aluminium, hot surfaces, wooden fittings and painted surfaces.
Brass: wipe off within a few minutes.
Avoid prolonged skin contact and rinse hands after use. Wear gloves for extended cleaning.
Avoid eye contact. If it happens, rinse with plenty of water.
Keep out of reach of children.
Do not mix with bleach or other cleaners.
Not sure your tap or basin finish is safe? Send us a quick photo.