WASHDX INSTRUCTIONS
WashDX.
Step-by-step.
Primary use: washing machines — front load (1 sachet) and top load (2 sachets). Dishwasher and geyser also on the box.
CHOOSE YOUR APPLIANCE
Pick the appliance. Get the exact steps.
Select your appliance below — primary uses are on the box, secondary uses are also covered.
ON THE BOX — PRIMARY
ON THE BOX — ALSO WORKS FOR
PRIMARY USE — ON THE BOX
Washing Machine (Front Load)
1 SACHET (50G)
Clears internal drum scale, repeat odour, and hard-water buildup from seals and elements.
- 1Keep the drum completely empty — no clothes, detergent, or other cleaner.
- 2Add 1 sachet directly into the drum.
- 3Run a hot empty cycle at 60°C or above for up to 60 minutes.
- 4Run one plain rinse cycle immediately after.
- 5Wipe the door gasket and soap drawer dry.
FREQUENCY
Monthly in hard-water homes, or every 6 to 8 weeks where buildup is lighter.
NOTE
Do not use within 24 hours of a bleach cycle.
Related guides
Connect the WashDX routine to the problem you are solving.
Scale symptoms, TDS triggers, and maintenance context for washing machines, geysers, and hard-water heater-side jobs.
PRODUCT
WashDX product page
Review the heavy-duty washer and heater-side positioning before starting the routine.
PROBLEM HUB
Washing machine hard-water guide
Scale symptoms, TDS triggers, and maintenance route — before opening the WashDX routine.
PROBLEM HUB
Geyser scale guide
Use when heating slows, noise increases, or the tank needs a flush plan.
TDS GUIDE
TDS 400, 600, and 800 ppm
Match your TDS reading to a realistic descaling frequency for washing machines and geysers.
BUYER GUIDE
Best geyser descaling powder
Purchase context for storage geyser scale, heater slowdown, and high-TDS homes.
NEED A DIFFERENT ROUTE?
Using a coffee machine or kettle instead?
For coffee machines and dishwashers, use DescaleX. For kettles and food-contact appliances, use DescaleX Bio.
GOOD TO KNOW
Do not use within 24 hours of a bleach cycle (chloramine gas risk).
Do not mix with detergent or any other cleaner.
Run washing-machine descales on an empty drum, hot cycle 60C+, max 60 minutes, then one rinse cycle.
Switch off and fully rinse geysers and boilers before returning them to regular use.
Immersion rods must be unplugged, cold, and rinsed before reuse.
Not sure which routine? Send us your appliance name or a photo.