TAPSTRIKE INTENSE INSTRUCTIONS
TapStrike Intense.
Spray, wait, wipe.
Spray directly on the surface, wait 30-60 seconds, wipe with a damp cloth. Scrub tougher spots and rinse if needed.
CHOOSE YOUR APPLIANCE
Pick the appliance. Get the exact steps.
Select your appliance below — primary uses are on the box, secondary uses are also covered.
ON THE BOX — PRIMARY
ON THE BOX — ALSO WORKS FOR
PRIMARY USE — ON THE BOX
Taps & Faucets
2-4 SPRAYS PER TAP
Clears the white ring at the tap base, water spots on the spout, and cloudy chrome.
- 1Spray directly on the tap body, spout edge, handle, and the ring at the tap base.
- 2Wait 30-60 seconds. Do not let it dry on the surface.
- 3Wipe with a damp cloth. Scrub the base ring with a soft brush or non-scratch sponge.
- 4Rinse with water if needed and dry the chrome for a streak-free finish.
- 5For thick crust, repeat once instead of leaving the spray on longer.
FREQUENCY
Weekly in hard-water homes. Twice a week if your water TDS is above 600.
NOTE
Unlacquered brass and copper: test a small hidden spot first. Do not use on hot taps or wooden handles.
NO WORK, MONEY BACK
Opened bottle accepted if it does not work.
If TapStrike Intense does not clear hard-water marks after you follow the steps above on a listed surface, we take the opened bottle back and refund eligible website orders.
Support may ask for your order ID, before/after photos or video of the surface, a photo of the bottle batch, and how you used it. Not covered: unlisted surfaces like marble or stone, skipped steps, or marketplace orders.
Related guides
Connect the TapStrike Intense routine to the stain you are fighting.
These links help you identify the residue, set a cleaning schedule from your water TDS, and pick the right route when scale is inside an appliance.
PRODUCT
TapStrike Intense product page
Pack details, ingredients, safe surfaces, and the no-work-money-back promise.
BLOG GUIDE
Remove stains from chrome taps
Why chrome clouds over and how to clear it without scratching the plating.
DIAGNOSE
Limescale vs soap scum vs rust
Identify the residue before you pick the cleaner.
TDS GUIDE
TDS 400, 600, and 800 ppm
Use your water reading to set how often taps and basins need a pass.
OTHER ROUTE
WashDX for showerheads and geysers
Scale inside showerheads, geysers, and washing machines needs a soak descaler instead.
NEED A DIFFERENT ROUTE?
Is the scale inside an appliance?
TapStrike Intense is for outer surfaces only. For showerheads, geysers, and washing machines, use WashDX. For coffee machines, use DescaleX. For kettles, use DescaleX Bio.
GOOD TO KNOW
Not for marble, granite, or natural stone. Acid etches them.
Do not apply on hot surfaces, wooden fittings, or painted surfaces.
Unlacquered brass and copper: test a small hidden spot first.
Avoid prolonged skin contact and rinse hands after use. Wear gloves for longer cleaning sessions.
Avoid eye contact. If it happens, rinse with plenty of water.
Keep out of reach of children. Store above 10°C, away from direct sunlight. Do not freeze.
Do not mix with bleach or other cleaners.
Not sure your tap or basin finish is safe? Send us a quick photo.