LOADING
LOADING
HARD WATER GUIDE · KERALA
168 ppm avg TDS · Low Hardness
Your water is relatively soft. Fighter can handle any mineral deposits that do appear.
AVG TDS
168 ppm
RANGE
118-218 ppm
SEVERITY
Low
STATE
Kerala
PINCODE
695562
Palode water, like most of Kerala, is sourced from borewells and groundwater aquifers. As water travels through rock and soil, it dissolves calcium and magnesium carbonates — the minerals responsible for hard water. The result: 168 ppm TDS, classified as Low hardness.
Water in this area has relatively low dissolved mineral content. Occasional light deposits may appear on glass surfaces, especially in drier months.
BIS standard IS:10500 considers water above 300 ppm as hard and recommends treatment above 500 ppm. At 168 ppm, Palode water is within the acceptable range, but mineral deposits on shower glass and faucets are still a common household issue.
White haze on shower glass
Calcium and magnesium deposits bond chemically to glass. They cannot be scrubbed off — only dissolved.
Crust around faucets & taps
Calcium carbonate builds up around tap bases, aerators, and showerhead holes, reducing water flow.
Cloudy tiles and grout
Grout lines and tile surfaces accumulate scale that standard bathroom cleaners can't remove.
Soap scum and poor lather
Hard water reacts with soap to form insoluble scum instead of foam, leaving skin and surfaces feeling filmy.
Geyser and appliance damage
At 168 ppm, scale builds inside geysers within months, cutting heating efficiency and lifespan.
Spots on glasses and vessels
Washed glassware develops white water spots as TDS minerals are left behind on drying.
Most bathroom cleaners — including popular brands — are alkaline (pH 8–12). Calcium carbonate, the primary mineral in hard water scale, is also alkaline. Like dissolves like — and opposite chemistry dissolves. To break calcium bonds, you need acid.
At Palode's 168 ppm, home remedies like diluted vinegar (pH ~3) have some effect on light deposits but cannot penetrate the dense mineral layer formed at this hardness level. A purpose-built multi-acid formula at pH 3.4 with cling-gel delivery is required.
01
SPRAY
Coat the stained surface with Fighter's cling-gel formula. It stays on vertical glass without running.
02
WAIT 60s
The triple-acid system (pH 3.4) penetrates and dissolves calcium carbonate, magnesium, and iron staining.
03
WIPE
Wipe or rinse off. No scrubbing. No second pass. Crystal-clear glass in one application.
What is the TDS of water in Palode?
Water in Palode, Kerala averages approximately 168 ppm TDS — classified as Low hardness. The typical range for this area is 118-218 ppm.
Is Palode water hard?
Yes. At 168 ppm, Palode water is classified as Low hardness by BIS standard IS:10500. Mineral effects are visible on bathroom surfaces, though drinking water remains within acceptable limits.
Does vinegar work on hard water stains in Palode?
Vinegar works on light scale below 300 ppm. At Palode's 168 ppm TDS, the mineral layer is too dense. A purpose-built acid cleaner like OrangeDemon Fighter performs significantly better at this hardness level.
Is Palode water safe to drink?
BIS IS:10500 recommends TDS below 500 ppm for drinking water. Palode averages 168 ppm — within acceptable limits, though an RO purifier adds an extra safety margin.
BUILT FOR PALODE WATER CONDITIONS
India's first acid-based shower glass cleaner. Tested in 450+ TDS conditions. Dissolves calcium, magnesium, and iron staining in 60 seconds — no scrubbing required.